- manufacturer
- Voestalpine
- Type
- PR 400/5,5
- Manufacture Date
- 1993
- Description
- direction of the operational phase from the engineer’s point of view: from left to right, height of the bottom pipe edge: approx. 900 mm, strip width: Min. 150 mm, max. 400 mm, strip thickness: min. 1.5, max. 5.5 mm, Material: Hot and cold rolled strip with the max. tensile strength 500N/mm2, Spool outer diameter: max. 2,000 mm, Spool inner diameter: 460 mm – 540 mm, with jaws 550 — 630 mm, Pipe length: 4 to 8 m, Cut tolerance: +/- 2,5 mm, Cuts per minute: max. 17, Line speed: max. 100 m/min (non-sequentially adjustable), Strip installation speed: 10 m/min (forward/backwards), Round pipe diameter: min. 45 mm, max. 127 mm, Pipe wall thickness: min. 1,5 mm; max. 5,5 mm, Pipe wall thickness and pipe diameter ratio: from 1:8 to 1:50, Square pipes: min. 35 x 35 mm, max. 100 x 100 mm, Rectangular pipes: min. 45 x 25 mm, max. »120 x 80 mm, Width-height ratio: « max. 1:2,5
First and second unwinders with disc carts. The first unwinder was replaced in 2005 by the VAI SEUTHE Company, Germany; Strip installation blade with a pressing roller; Levelling part with two drive rollers and six levelling rollers; Strip preparation with sledge I and II and transversal shears for strip end cutting and automatic strip welding (gas exhaustion); Spiral battery and charging drive; Overhead roller – passage beneath; Profiling section: BREAK-DOWN (two racks), CTA and FIN-PASS (two racks); BLISSENBACH internal weld imitation (from the R500/4 line it is transferred to the PR400/5.5 line), year of production: 2005; Welding part with a pre-welding and welding console and cogwheels; HF-Generator Thermatool of 300 kW per tube (gas exhaustion); Support with weld imitation blade; Cooling sumps: The second cooling sump was replaced in 2006; Calibrating section (four racks); PRUEFTECHNIK weld control; Turk heads, Flying saw, Roller with a buffer, MAIR piling device with scales, Transporter: TOM Mežica. The minor programme replacement on the line lasts 1.5 h, while the major programme replacement takes 2,5 h, since the programme can be prepared on the FIN PASS spare racks and the calibrated section
ATTENTION: The final approval of the offer takes place exclusively after the approval of the insolvency administration. - by order of:
- NetBid GmbH (Austria)
*** ended *** Voestalpine PR 400/5,5 continuous pipe production line
PreviousAuction Type
Auction Premium- ends:
- 15/01/2015
14:01 - number of bids:
- 2 Bids
- Status:
- Auction closed
- Item no.:
- X13251-1
- surcharge
- 8.00%
continuous pipe production line
Item no.: X13251-1
login
You must be logged in to use this functionality.
Email to a friend
Make an appointment
It is not possible to bid on this machine at this moment
* Bids and limits plus commission and vat
There will be no delivery. Assets are sold as is/where is. For your calculation please keep in mind the additional cost for removal, transportation, insurance and so on.
* Bids over € 5.000 are accepted with Bank Certificate (this also applies to further auctions).
-
Details continuous pipe production line