- Producent
- Voestalpine
- Model
- PR 400/5,5
- Rok prod.
- 1993
- Opis
- direction of the operational phase from the engineer’s point of view: from left to right, height of the bottom pipe edge: approx. 900 mm, strip width: Min. 150 mm, max. 400 mm, strip thickness: min. 1.5, max. 5.5 mm, Material: Hot and cold rolled strip with the max. tensile strength 500N/mm2, Spool outer diameter: max. 2,000 mm, Spool inner diameter: 460 mm – 540 mm, with jaws 550 — 630 mm, Pipe length: 4 to 8 m, Cut tolerance: +/- 2,5 mm, Cuts per minute: max. 17, Line speed: max. 100 m/min (non-sequentially adjustable), Strip installation speed: 10 m/min (forward/backwards), Round pipe diameter: min. 45 mm, max. 127 mm, Pipe wall thickness: min. 1,5 mm; max. 5,5 mm, Pipe wall thickness and pipe diameter ratio: from 1:8 to 1:50, Square pipes: min. 35 x 35 mm, max. 100 x 100 mm, Rectangular pipes: min. 45 x 25 mm, max. »120 x 80 mm, Width-height ratio: « max. 1:2,5
First and second unwinders with disc carts. The first unwinder was replaced in 2005 by the VAI SEUTHE Company, Germany; Strip installation blade with a pressing roller; Levelling part with two drive rollers and six levelling rollers; Strip preparation with sledge I and II and transversal shears for strip end cutting and automatic strip welding (gas exhaustion); Spiral battery and charging drive; Overhead roller – passage beneath; Profiling section: BREAK-DOWN (two racks), CTA and FIN-PASS (two racks); BLISSENBACH internal weld imitation (from the R500/4 line it is transferred to the PR400/5.5 line), year of production: 2005; Welding part with a pre-welding and welding console and cogwheels; HF-Generator Thermatool of 300 kW per tube (gas exhaustion); Support with weld imitation blade; Cooling sumps: The second cooling sump was replaced in 2006; Calibrating section (four racks); PRUEFTECHNIK weld control; Turk heads, Flying saw, Roller with a buffer, MAIR piling device with scales, Transporter: TOM Mežica. The minor programme replacement on the line lasts 1.5 h, while the major programme replacement takes 2,5 h, since the programme can be prepared on the FIN PASS spare racks and the calibrated section
ATTENTION: The final approval of the offer takes place exclusively after the approval of the insolvency administration. - Zlecenie:
- NetBid GmbH (Austria)
*** Skończone *** Voestalpine PR 400/5,5 continuous pipe production line
WsteczTyp oferty
Auction Premium- Koniec aukcji:
- 15.01.2015
14:01 - Liczba ofert:
- 2 Oferty
- Status:
- Aukcja zakończona
- Numer oferty:
- X13251-1
- Prowizja
- 8,00%
continuous pipe production line
Numer oferty: X13251-1
Zaloguj się
Zanim oddasz ofertę musisz się zalogować.
Udostępnij
Ustal termin oględzin
It is not possible to bid on this machine at this moment
* Oferta i limit będą powiększone o prowizję i podatek.
Oferta nie zawiera kosztów dostawy. W twojej kalkulacji dolicz dodatkowe koszty demontażu, transportu, ubezpieczenia, itp.
Oferty od 5.000 EUR wymagają potwierdzenia bankowego (dotyczy to również innych aukcji).
-
Szczegóły continuous pipe production line